Repairing Tongue And Groove Laminate Flooring

Repairing damaged laminate boards is easy with the tongue and groove locking system.

Repairing tongue and groove laminate flooring. When you disconnect the tongue of one plank from the groove of the other plank, they’re unlocked. Lastly, clean any sawdust or glue from around the repair. Damaging laminate flooring planks is hard, but it happens! However, if a plank gets damaged, it detracts from the beauty of the flooring.

At the end joint, use the hammer and chisel to cut straight down and through the tongue at the end of the damaged floorboard. This is crucial to find the exact replacement for your floor. Use the chisel to pry the severed tongue from the groove in the end of the adjacent floorboard. Tips for tongue and groove flooring.

Another exacerbating condition is water damage. How to remove tongue and groove boards in 5 steps. If your hardwood floor is in generally fine shape, with only a damaged spot or two, it is easy and economical to make small repairs by replacing a strip or plank of flooring. This allows for expansion and contraction.

Create expansion joints and use a dehumidifier in the room to reduce moisture content causing the bubbles and swelling. Do you call in a professional and pay tons of money to replace the plank? Reasons being the floor is not attached to the sub floor as they are with glue downs or nailed floors. The floor must be empty no matter what material you’re installing.

Here’s a tip for cutting the groove: If you have tongue and groove boards on your floor, there is a chance that you will need to repair them at some point. When it comes to any major repairs the floating floor is the hardest type of them all. Repairing solid wood laminate flooring.

All laminate planks even in the same brands have different tongue and groove types, hardly any two are the same. To fix minor damage, all you need is a laminate floor repair kit with putty to fix big chips or a floor repair marker to hide small scratches. Apply a bead of wood glue to all four edges of the new plank. Water damage to your floor.

The problem is magnified when the boards were not tightly laid in the first place. Whether it's a scratch or dent, learn how to repair your laminate flooring planks with ease. Move down the line of boards until all of the gaps are closed along that line of laminate planks. Stick the blade inside the groove and cut off the bottom from the inside (or use a table saw).

If one of them is damaged, you will need to remove it and put a new one in its place. You’ll know the planks are unlocked when you remove the tongue of one plank from the groove of the adjoining plank. There actually is an easy way to replace a damaged laminate plank if you are ready to spend some time and have a little bit of patience. Moisture is a killer for wood and laminate flooring, but there are methods for water damage repairs that can be accomplished with a few tools and intermediate carpentry skills.

Work from the wall to the damaged area. A new panel or panels will take the place of the damaged sections. It’s a great choice for households with children and pets and comes in a variety of styles, textures and colors. Remember, the glue will set very quickly, so you will need to work fast to finish.

Posted on may 6, 2013 by admin. Here are the basics of how to replace damaged tongue and groove boards. Empty the space — bottom line: By simply working each piece apart and together like you would a puzzle, you can quickly repair any damages that harmed your floors.

Laminate flooring is an attractive, durable kind of flooring made to withstand stains, fading and dents. Use a hammer and chisel to chop through the damaged floorboards. Lastly, make sure the underlayment underneath is not damaged due to urine. Repairing a water damaged laminate floor.

Line up the new plank’s tongue and groove with the old piece and snap the new piece into position. To fix the gaps in the laminate flooring, place the aluminum block with the sticky side down on the board end and over the gap. Before getting down to business, decide which planks are ready for removal. You can also fix buckled areas of flooring and avoid having to completely refinish your floors.

Absolute precision is needed to insure the tongue and groove go back together in the same vertical plane. Use the rubber mallet to tap the board and close the gap. Insert the glued tongue of the new plank into the groove on the existing flooring and drop the plank into place. You may have to do this several times before you can reach & replace the damaged laminate.

Repair water damaged floor — if you are reading this article, then the worst case scenario has probably occurred; The best way to fix constant bubbling on laminate flooring is to get rid of excess moisture under the planks. The room you’re about to work on must be empty—floor to ceiling—if you’re installing unfinished wood floors. Apply the epoxy to the “tongue” and “groove” of the boards surrounding the repair, as well as the “tongue” and “groove” of the replacement piece.

Reinstall thresholds and shoe molding as needed. If any problems come up, such as water damage or scratches, or if laminate boards lift or buckle, you can often fix them yourself.